3135 movement

[frederico]

Good afternoon Gentlemen

Yuki is out of stock with the 3135 movements
I accidently came across the 3135 movement on DH Gate
Is there anybody familiar with this seller?
The movement looks like an 3135 but is it??
Thanks in advance for help or advicce where I can purchase one if DH Gate is not good there is a fito below from DHGate
Regards
Frits



Verzonden vanaf mijn iPhone met Tapatalk

 

[frederico]

Fito must be foto


Verzonden vanaf mijn iPhone met Tapatalk

 

[HorFan]

If the seller is Mr.Flower, then it's legit. You may be able to get it slightly cheaper from his Ebay store, "bosshua007".

 

[frederico]

Thank you Sir
I will take s look
I am building a 36 datejust and dont want to clip off the feet of the dial so I need the 3135 movement
Any other movement and the feet have to go
And I think that is a no go


Verzonden vanaf mijn iPhone met Tapatalk

 

[frederico]

I found it and you are right 210 us
Thanks a lot



Verzonden vanaf mijn iPhone met Tapatalk

 

[frederico]

So I contacted the seller on Ebay and asked him if his clone 3135 movement has the holes for the dial on the same place as the Gen 3135 movement
Unfortunately he is not sure
So my question to you guys is:
Is there anybody familiar to the clone 3135 and knows if these dial holes are correct like the Gen 3135
Thanks for your help


Verzonden vanaf mijn iPhone met Tapatalk

 

[frederico]

Forgot to mention
Its a build with Gen 36mm Datejust and all other Gen parts exept the 3135!


Verzonden vanaf mijn iPhone met Tapatalk

 

[HorFan]

I'm pretty sure the dial foot holes are in the correct Rolex position. The dials that Yuki sells are to Rolex specs and fit this movement. But, then again, I'm not an expert so I could be wrong. You should tag one of the Rollie modders to confirm.

 

[frederico]

I will do that Sir
Thanks for your help
Thats the support everyone is looking for


Verzonden vanaf mijn iPhone met Tapatalk