- Shipping From
- CONUS
- Shipping To
- CONUS
- Item Source
- Another Forum
- Item Condition
- Like New
- Price
- 620
- Shipping Price
- 0
- Currency
- USD
- Payment
- Paypal Gift (No Notes)
- Terms
- I have read Horology Board's Terms and Conditions
Please find original post here:
https://forum.replica-watch.info/forum/replica-watch-sales/7315083-fs-bk-dssd-d-blue-v7-with-prof-2xar-crystal-eta
BK's Mods:
- center the pearl
- reinstall DWO for better date positions (top to bottom)
- fully press in and even the crystal
- fully press the floating core (compression ring+movement as a unit) in the watch case
- line up the 12 o'clock marker to the engraved coronent on the rehaut engraving. Again the factory often leave them misaligned.
- reinstall bezel insert to line it up with the dial
- set proper crown stem length. Noobfactory sometimes make it too long which puts pressure on the movement and can diminish WR
- tighten bezel => no rocking bezel
- replace the 2 movement ring tabs with Swiss made ones which better secure the movement in place
- replace the 2 movement ring screws with high quality ones which break less
Watch is mint and an absolute stunner.
https://forum.replica-watch.info/forum/replica-watch-sales/7315083-fs-bk-dssd-d-blue-v7-with-prof-2xar-crystal-eta
BK's Mods:
- center the pearl
- reinstall DWO for better date positions (top to bottom)
- fully press in and even the crystal
- fully press the floating core (compression ring+movement as a unit) in the watch case
- line up the 12 o'clock marker to the engraved coronent on the rehaut engraving. Again the factory often leave them misaligned.
- reinstall bezel insert to line it up with the dial
- set proper crown stem length. Noobfactory sometimes make it too long which puts pressure on the movement and can diminish WR
- tighten bezel => no rocking bezel
- replace the 2 movement ring tabs with Swiss made ones which better secure the movement in place
- replace the 2 movement ring screws with high quality ones which break less
Watch is mint and an absolute stunner.