BP Rolex 16710 Pepsi incoming
- Thread starter Thrasher
- Start date
-
Please add our email support@horologyboard.com and/or domain horologyboard.com into your whitelist to make sure emails are not filtered or blocked. If you have registered but have not received your activation email, please check you spam/junk folder. If you still cannot find your email to activate your account, please Contact Us. Thank you.
OP
- Thread Starter
- #3
There is a good thread here
BP Factory Rolex 16710 GMT Full Review VS Gen
BP Factory Rolex 16710 GMT Full Review VS Gen Greetings fellow watchaholics, as the title states, here is a full review of the BP Rolex 16710 GMT. There are a lot of things to like about this rep, and as you will see overall I gave it a high rating. There are some things which will need fixing...
forum.replica-watch.info
OP
- Thread Starter
- #4
I think it could be a good franken project especially with a better dial and DWO and maybe crystal and grinding the caseback flat to make it thinner
This Version is expect the movement totally trash in my opinion.
Completely wrong casehape, look at the fat bevel on the lugs to make an optical illusion of slimmer ones. Crap bezel construction.
A wire holds the bezel in place like on cheap Reps.
Gesendet von meinem 23078PND5G mit Tapatalk
Completely wrong casehape, look at the fat bevel on the lugs to make an optical illusion of slimmer ones. Crap bezel construction.
A wire holds the bezel in place like on cheap Reps.
Gesendet von meinem 23078PND5G mit Tapatalk
I build my own 16750 with a BP Explorer Case. The Case except a gen Crystal. For the bezel I bought the gen Spec Bezel system from wholesale.
With a bit CG reshape you got a nice result I think
Here is my modded 16750 with good bezel system, gen Crystal, etc....
With a bit CG reshape you got a nice result I think
Here is my modded 16750 with good bezel system, gen Crystal, etc....
Last edited: