Polishing questions?

  • Please add our email support@horologyboard.com and/or domain horologyboard.com into your whitelist to make sure emails are not filtered or blocked. If you have registered but have not received your activation email, please check you spam/junk folder. If you still cannot find your email to activate your account, please Contact Us. Thank you.

CarpetRyd

Content Contributor
Feb 24, 2018
131
158
43
Hey guys,
Over the weekend I modified my tropic rubber strap from Oris. Since it's being sported on a 16610 the logo on the buckle just wasn't going to work...

Dremel / scotch pad to the rescue - I was able to get the stamped logo out and the buckle looks pretty good... There are still some swirls from the Dremel work - I could spend hours with a scotch pad and get them out eventually, but hoping there was an easier solution?

Dremel with buffing wheel?

Tried to capture the buckle state in the attached pics. Thoughts?

Thanks

A638A297-40D9-408A-967F-BC793ABA6E1B.jpeg

1A8EFD37-5B11-4AA2-916D-DD6D01402553.jpeg