---WW--- WM9 Rolex Daytona case project

  • Please add our email support@horologyboard.com and/or domain horologyboard.com into your whitelist to make sure emails are not filtered or blocked. If you have registered but have not received your activation email, please check you spam/junk folder. If you still cannot find your email to activate your account, please Contact Us. Thank you.

DocThor

Diplomat
Diplomat
Oct 17, 2018
16
3
3
Shipping From
EU
Shipping To
World Wide
Item Source
Other
Item Condition
Used
Price
399
Shipping Price
0
Payment
Paypal (No Notes), Paypal Gift (No Notes), Bank Transfer
Terms
I have read Horology Board's Terms and Conditions
Somewhen last year I bought a WM9 Daytona case over at RWI. At this time I was deep into Daytonas and a reliable fully working chrono Daytona with gen like height wasn't in sight.
This case has an overall height of 12,84mm and is also able to take a fully working 7750 with a height of ~10mm (with rotor, dial and hands).
But before I was able to finish this project I lost my interest in Daytonas, got seriously sick and now I don't have the energy to move on with it.

Your chance to get your hands on something that is not only rare...I'd say it's unique!

This project however isn't finished with all it's parts.

Included in this sale is:

WM9 Daytona case
Two bezels
One crystal
Crystal gasket

Those parts where all I got from that sale at RWI last year.

Additionaly I bought

A brand spanking new swiss ETA 7750 (out of a donnor watch)
A brand spanking new JF Daytona bracelet

What you need is a dial and a conversion of the movement to 3-6-9 with either sec@6 or sec@9.
Conversion will cost something around 180€...that's at least what Domi asked for his sec@6 mod.

I paid:

Daytona case with parts 110€
7750 300€
JF bracelet 95€

For the whole lot I'm asking 399€ (Paypal F&F or you add the fees) shipped within Germany (DHL trackable, add 10€ for WW)

p0e00.jpg
img_20181019_092936oef1u.jpg
img_20181019_092957jdisx.jpg
img_20181019_093011iaiq0.jpg
img_20181019_09302068fxj.jpg
img_20181019_093028m2f4m.jpg
img_20181019_093044gjewb.jpg
img_20181019_093051zkehb.jpg
img_20181019_093323h0io8.jpg

Crown position fits the case/movement
img_20181019_095731nfflv.jpg

Hands are lower than rehaut so won't touch the glass
img_20181019_095937a0ejm.jpg

Caseback is screwed on with the movement inside
img_20181019_100228vvihf.jpg

Movement height ~10mm including hands and rotor
img_20181019_1012403yi50.jpg

Case height with glass and caseback
image.pngixdhd.jpg


Swiss ETA 7750

img_20181019_093634uacdw.jpg
img_20181019_093651z1dfs.jpg
img_20181019_093730hkf8l.jpg
 
OP
D

DocThor

Diplomat
Diplomat
Oct 17, 2018
16
3
3
Jeebuzz...a noob fail...haven't checked all the pics...sorry...

Crown position fits the case/movement
img_20181019_095731nfflv.jpg

Hands are lower than rehaut so won't touch the glass
img_20181019_095937a0ejm.jpg

Caseback is screwed on with the movement inside
img_20181019_100228vvihf.jpg

Movement height ~10mm including hands and rotor
img_20181019_1012403yi50.jpg

Case height with glass and caseback
image.pngixdhd.jpg
 
OP
D

DocThor

Diplomat
Diplomat
Oct 17, 2018
16
3
3
Project minus Eta 7750 on hold over @ RG

Gesendet von meinem ANE-LX1 mit Tapatalk
 
OP
D

DocThor

Diplomat
Diplomat
Oct 17, 2018
16
3
3
Withdrawn due to crappy case...

Gesendet von meinem ANE-LX1 mit Tapatalk